News

Orientation of box-type packaging [Xingtai Packaging and Printing]

2023-02-17
The box type is generally a regular rectangle or cube, and its orientation mainly includes face, edge, corner, cover or seal. Theoretically, these elements that make up the box type can be used as elements of anti-counterfeit design. Therefore, the box type packaging can be used as elements of anti-counterfeit design: face (6), edge (12), corner (8), cover or seal (1-2) 2). All the orientations can be used as false orientations, The pseudo-technical meter used to apply, but in order to facilitate the recognition of the consumer, a certain principle should be measured for selection. The selection of surface samples, preferably the upper and the front side with pictures, and the two ends of the secondary flow: the selection of the upper edge of the shift surface, the selection of the edge, the most preferred upper edge, and the side of the sub-optimal strip: the bottom edge is generally less selected, the selection of the angle: the upper four corners are preferred, and the lower four corners are small for use. In the self response, the surface and the edge can be selected, One of the elements in the corner is used as the anti-counterfeiting orientation, and he plans to use two of them into three full elements as the anti-counterfeiting orientation. At the same time, he can select multiple orientations in each element, and combine multiple orientations in each element for multiple combinations. Therefore, there are many choices and combinations for the orientation that can be used as the damage package design for a single box type packaging. After selecting the anti-counterfeiting orientation, the fake rice can be closed in the corresponding orientation, The damage location of this group of products was determined.


In addition, the packaging of Qu Yuduo products is more than one layer, many even up to five layers, and the common one is three layers. In theory, the anti-counterfeiting technology can be implemented anywhere. For example, for the packaging of "packaged products", cosmetics such as glass bottles, plastic bottles and plastic bags are generally used, and then packaged in paper boxes, and finally packaged in larger paper boxes or other gift boxes to form the "package" of chemicals. For this case, When selecting the anti-counterfeiting orientation to implement anti-counterfeiting technology, the anti-counterfeiting orientation can be selected separately on each layer of packaging, and then combined to form the final anti-counterfeiting orientation selection scheme of the product. Therefore, in terms of the anti-counterfeiting orientation of the packaging container, theoretically, the options are very numerous and complex, but in practical application, the cost of packaging, the convenience of implementing anti-counterfeiting technology, and the mutual cooperation of various anti-counterfeiting orientations should also be considered, The anti-counterfeiting orientation and the adaptability of the anti-counterfeiting technology shall be comprehensively considered and compared to finally select the appropriate and reasonable implementation scheme.


We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept